EN
200-Tb DM20017 (01-2012)
4
The following precautions are used throughout this manual
as indicated in their description. All operators must read,
understand and practice the following safety precautions:
WARNING: To warn of hazards or unsafe
practices that could result in severe personal
injury or death.
Caution: To warn of unsafe practice that could
result in minor or moderate personal injury.
FOR SAFETY: To identify actions that must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment. Read this manual
carefully. Know when these conditions can exist. Locate
all safety devices on the machine. Then, take necessary
steps to train machine operators. Report machine damage
or faulty operation immediately. Do not use the machine if
it is not in proper operating condition.
WARNING: Electrical Hazard.
•
Disconnect battery before servicing machine.
•
Do not modify battery or charger connections.
•
If the power cord to the charger is damaged or
broken, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in
order to avoid a hazard.
WARNING: Electrical Shock Hazard. DO NOT use
outdoors. DO NOT expose to rain or moisture.
Store indoors.
Follow safety instructions of chemical manufacturer
(MSDS).
FOR SAFETY:
1. Do not operate machine:
•
Unless trained and authorized.
•
Unless operator manual is read and understood.
•
Unless mentally and physically capable of
following machine instructions.
•
Unless in proper operating condition.
•
With damaged wires or cords.
•
Unless on a flat, level surface.
2. Before operating machine:
•
Follow safety guidelines concerning wet floors.
•
Make sure all safety devices are in place and
operate properly.
3. When using machine:
•
Do not push on inclines.
•
Always stop the machine on a flat level surface
and engage the wheel lock before dispensing
cleaning solution.
•
Report machine damage or faulty operation
immediately.
•
Never allow children to play on or around machine.
•
Do not point dispensing nozzle at other persons.
4. When servicing machine:
•
Always stop machine on a flat level surface
and engage the wheel lock before servicing the
machine.
•
Disconnect battery.
•
All repairs must be performed by an authorized
service person.
•
Use manufacturer supplied or approved
replacement parts.
•
Do not modify the machine from its original design.
5. When using cleaning solutions:
•
Do not mix 5000-Sc cleaning solution with
conventional cleaning chemicals.
•
Do not drink cleaning solution.
•
Refer to MSDS (Material Safety Data Sheet) for
additional safety information and precautions.
OPERATION
SAFETY PRECAUTIONS
•
Wipe up any spills.
•
Do not power spray or hose off the machine.
Electrical malfunction may occur.
•
In an area where flammable vapors/liquids
or combustable dusts are present.
INTENDED USE
This machine is intended for commercial use only. The
machine is designed for storing and dispensing 5000-Sc
cleaning solution only in an indoor environment. It is not
intended or constructed for any other use.
Home
Find...
Go To..
