MAINTENANCE
1186E MM268 (6–94)
3Ć18
4. Thread two 10-24 screws into the two
threaded holes in the face of the
self-adjusting sheave.
A
B
C
D
03141
SHORT MAIN BRUSH BELT
A. Self-Adjusting Sheave
B. Short Main Brush Belt
C. Two-Step Sheave
D. Threaded Holes
5. Evenly tighten the two screws to expand the
self-adjusting sheave.
6. Slip the belt off the sheaves.
7. Slide the new belt over the sheaves.
8. Unthread the two screws.
9. Replace the right side bumper and cover,
and access cover.
LONG MAIN BRUSH BELT
The long main brush belt transfers power from the
motor to the main brush two-step sheave. Check
the belt for wear after every 50 hours of operation.
A belt idler is provided to control belt tension and
is not adjustable.
TO REPLACE LONG MAIN BRUSH BELT
1. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
2. Remove the debris hopper.
3. Remove the right side bumper and cover,
and access cover.
4. Thread two 10-24 screws into the two
threaded holes in the face of the
self-adjusting sheave.
A
B
C
D
E
03141
LONG MAIN BRUSH BELT
A. Self-Adjusting Sheave
B. Short Main Brush Belt
C. Two-Step Sheave
D. Long Main Brush Belt
E. Threaded Holes
Содержание 1186E
