connect it. When the Bluetooth pairing is successful, you will hear a "Ding-dong"
sound. Then you can play the music. In case of unsuccessful pairing, turn the knob
to"OFF" and restart it. After successfully connecting to Bluetooth
，
if you turn off the
device, but the Bluetooth on your smartphone remains open , when you restart the
device , the Bluetooth will be connectedautomatically.
FM RADIO MODE
To activate radio FM mode, turn onthe A66 speaker,use Mode button to
select FMorpress the FM button on the remote control . To search for available radio
stations automatically , click and hold
▶
ll . FM Stations will be saved automatically
To switch stations , click l
◀
◀
or
▶▶
l
．
or click the number keys on the remote
control, each number key will save the corresponding FM radio station.
To start searching radio stations manually, please use the number on the remote to
enter the station number you need. For example : if you want to search for "90.5"
radio station, you can directly press the number 905 on the remote control to go to
90.5 radio station.
AUX MODE
To activate AUX mode, turn on the loudspeaker , Use Mode button to select AUX.
Once you have selected this mode , you can use AUX cable to connect your MP3 or
computer with the speaker, and then play your music.
SD MODE
To activate the SD mode, turn on the speaker and insert the SD card to
automatically switch to SD mode and play the music from SD card .After pulling out,
if you re-insert the TF card , the speaker will start playing from the previous
breakpoint.
说明书第五页
U-DISK MODE
To activate U-DISK mode, turn on the loudspeaker and insert your U-disk to
automatically switch to U-disk mode. After pulling out, if you re-insert the U-disk ,
the speaker will start playing from the previous breakpoint.
Recording mode
In TF / USB mode, you click REC to enter the recording mode, and then you must
use the microphone to record. Press REC again to end the recording and play the
recording. The recording will be saved in TF card or USB flash memory.
The steps to record the sound out through microphone as follows: