TM-93
6
5.5.1
Dose Rate Alarm Setting:
1. Continuing the operations from 5.5, press the
button to enter the next stratum enable alarm setting;
select the high value or low value and then press the
button to enter the next stratum setting.
2. Press the
button: Number cursor will move towards
the right.
Press the
button: Numbers 0~9; the number will
increase.
Press the “
” button to save the settings and return to
the measurement screen.
3. Enable alarm setting (using high value); using the
measurement range as the datum, it will automatically
determine whether the yellow limit has been exceeded;
when the red area is reached, the alarm will go off!
If the low value set exceeded the high value, press the
button and the high and low values will
automatically be switched around and saved.
