10
z
Alarm Function :(TM-83N/84N only)
User can setting a Hi and Lo limit, when temperature
read over limit range, the buzzer will be sounded until
the reading come back in the limit range or disable this
function.
Press and hold
(ALARM) key to turn the alarm
enable or disable.
z
Setting Limit Range for Alarm: (TM-83N/84N only)
User can enter setup mode to set limit hi and lo for alarm
function.
1. Press and hold
(Limit) key to set T1 Hi
2. Press up
and down
key to increase or
decrease temperature.
Press left
and right
key to select digit
and negative symbol.
3. Press
(SET) Key to save setting value.
Into set T1 Lo.
4. Repeat step 2 to set T1 Lo temperature.
5. Press
(SET) Key to save setting value and
leave setup mode. (TM-82N/84N into the set T2 Hi)
6. Repeat step 2 to set T2 Hi temperature.
7. Press
(SET) Key to save setting value.
