Tenmars TM-191, Руководство пользователя

Страница: 4 / 8

TM-191
4 Identifying Parts
1. Sensor position.
2. LCD
3. Power on/off.
4. maximum hold button
5. Data hole button
6. mG unit select button
7. µT unit select button
8. Range select button
9. Battery cover.
5 Measurement Procedures
Press to power on.
Select for mG unit or for µT unit.
Position the front (refer to Figure 1) of the meter to
measure the electromagnetic waves. Try to change the
measurement angle or position for obtaining the highest
reading value (please refer to Figure 2 to 6).
Read the measured value. The display of “OL” on the left
highest position indicates there is an overload on the
reading. Please press to select a higher range for
measurement again.
Due to the environmental magnetic field factors, this
magnetic field meter could display a reading value that is
lower than 0.5mG prior to measuring. This is not a
malfunction of the device.
To permanently lock and keep the reading displayed on
the LCD, press or press again to unlock.
To retain the maximum value, press and the
reading value displayed on the LCD will keep updating to
the maximum value.
EN-2