www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com
TM
TM
Page <4>
V1.0
28/03/16
AT90DH Soldering Station
User’s Manual
Default temperature unit is °C.
(picture one and picture two)
3. Shortcut temperature preset
When the machine works, press key “▼” or key “▲” (picture 3) to adjust the temperature. When “SET” lights, press and
hold the “▲” or key “▼” until the temperature readout flashes, stop and store a desired temperature.
4. Shortcut temperature presets
When the machine works right, press key 1, key 2 or key 3 (picture 5), you can get the temperature setted before and use
them for the current working condition. When the machine works right, press key 1 , key 2 or key 3 (> 3 seconds), you can
make the current temperature as the shortcut one and stored at channel! and channel 2 and channel 3.
5. Temperature Calibration
When replacing the heating element or soldering tip, you need to calibrate the temperature, press “▲” “▼”at the same
time(picture 6),enter the mode of setting program, you can see from picture 7