14
Storing and recalling readings
•
To store a reading:
•
Press STORE once, STORE and No.xxxx appears to confirm the operation and
the upper right secondary display shows the current measurement reading.
•
Press ► to toggle between clearing the stored readings and start from the first
or the last stored reading. The lower right secondary display shows the original
number of records.
•
Press STORE the second time, STORE and S appears. The upper right
secondary display shows the storing time interval in second, it is preset to zero
which means it will not auto update reading. To change the interval in second by
pr or - from 0 up to 255 seconds.
•
Press and hold + or - to access quick access setting.
•
Press STORE a third time, STORE and No.9999 appears.
•
The upper right secondary display shows the index number increased by one.
•
The lower right secondary display shows the value of the corresponding index
number, the primary display shows the current measurement reading.
•
If there is no set time to store the reading, each press of STORE will store one
reading. An index number increase one.
•
The maximum number of stored reading is 9999. When the stored readings
memory is full, the meter will stop storing data.
•
To exit and stored the reading, press EXIT. To exit without storing the reading, turn
the meter off manually.
•
Automatic power off feature will be disabled after entering this mode.
•
Use the following procedure to recall the stored reading:
•
Press RECALL to recall the stored value and RECALL appears to confirm the
operation. The upper right secondary display shows the index number No.xxxx.
•
The primary display shows the corresponding recalled data and the lower right
secondary display shows the total number of the stored data.
•
Press ► button to enable the SEND feature to export the data to the computer
via USB or RS232.
•
The software shows the data storing time and also the data value. After the data
transferring is completed, the SEND feature will be disabled automatically .
•
Press + or - button to view additional stored reading.
•
Press and hold + or - to access quick recalling.
•
Press EXIT to exit recalling.
Setup Options
•
To enter the Setup mode, turn the meter on and press the SETUP button. It
is recommended to change the default setting only when the Meter is at DCV
measurement mode.
•
In the setup mode, each press of SETUP button steps to the next selection. Each
press of - or + button decrements or increments an option.
•
Each setup selection and option appears in the primary display in the sequence
shown in the following table.
Saving Setup Options
•
At each setup option store your choice and exit setup by pressing EXIT. To
advance to the next option press +.
•
To exit without saving press SETUP.
Содержание 72-8720
Страница 1: ...1 Model 72 8720 Digital Bench Multimeter ...
