7
MAINTENANCE
5. VSET<X>?
•
Description: Returns the output voltage setting.
•
Example VSET1?
•
Returns the CH1 voltage setting
6. IOUT<X>?
•
Description: Returns the actual output current.
•
Example IOUT1?
•
Returns the CH1 output current
7. VOUT<X>?
•
Description: Returns the actual output voltage.
•
Example VOUT1?
•
Returns the CH1 output voltage
8. OUT<Boolean>
•
Description: Turns on or off the output.
•
Boolean: 0 OFF, 1 ON
•
Example: OUT1 Turns on the output
9. BEEP<Boolean>
•
Description: Turns on or off the beep. Boolean:
•
boolean logic.
•
Example BEEP1 Turns on the beep.
10. STATUS
?
•
Description: Returns the POWER SUPPLY status.
•
Contents 8 bits in the following format
•
Bit
Item
Description
0
CHl
0=CC mode, l=CV mode
1
CH2
0=CC mode, l=CV mode
2,3,4,5 N/A
6
Output 0=Off, l=On
7
N/AN/A
11. *IDN?
•
Description: Returns the 72-26XX identification.
•
Example *IDN?
•
Contents TENMA 72-26XX V2.0 (Manufacturer, model name,).
12. RCL<NR1>
•
Description: Recalls a panel setting.
Cleaning
•
Use a damp cloth and a small amount of liquid detergent if necessary.
•
Never submerse the power supply in liquid or allow any liquid to enter the case.
•
Do not use any chemicals, abrasives or solvents that could damage the power
supply casing.
Changing the fuse
•
Replace the fuse only with one of exactly the same type and rating.
•
Disconnect the mains power and unplug the mains lead before replacing the fuse.
•
Fuse required T3A/250V 20x5mm dia (72-2630 & 72-2635) and T5A/250V 20x5mm
dia (72-2640 & 72-2645).
