5
COLLECTION BIN CLEANING INSTRUCTION
1. Press and hold the
POWER
button for 3 seconds to turn off
the unit. Unplug Power Cord from AC outlet.
2. Open trash can lid, lift handle to remove Collection Bin from
the unit.
3. Unlock side clips and remove trash bag(Refer to Trash Bag Installation
instructions above).
4. Wash Collection Bin by hand in warm water with mild soap. Avoid using harsh
chemical or abrasive cleaning material. Rinse and dry thoroughly. The
Collection Bin is NOT dishwasher safe.
5. Gently clean sensors and dirt inlet area with a damp cloth. Do not scrub or use
abrasive cleaning materials.
6. Replace Collection Bin back into the unit. If Collection Bin is improperly installed,
an audible Beep will sound once the unit is plugged in and powered back on.
HEPA AND AIR OUTLET FILTERS CLEANING INSTRUCTION
It is recommended to clean the HEPA and Air Outlet filters periodically to keep the
Smart Touchless Vac-Can operating at peak performance. Poorly maintained HEPA
and Air Outlet filters may collect debris to cause obstruction in vacuum’s air flow and
significant degrade performance.
1. Press and hold the
POWER
button for 3 seconds to turn off
the unit. Unplug Power Cord from AC outlet.
2. To remove HEPA filter, open trash can lid, lift and remove
HEPA filter from its housing. (see fig. a)
3. To remove Air Outlet filter, press the filter holder in the back
of the unit, the holder will pop open. (see fig. b& c)
4. Rinse both filters under cold running water for two
minutes until water runs clear and filter is clear from
any visible debris.
5. Dry filters thoroughly before inserting back into
housing placements.
IMPORTANT!
NEVER OPERATE THE MACHINE
WITHOUT HEPA OR AIR OUTLET FILTER PROPERLY IN
PLACE.
fig. a
fig. b
fig. c
