6. The kettle will not re-boil until the
switch is pressed again. The kettle may
be stored on the power base when not
in use.
NOTE: Always disconnect the power
supply when not use.
Boil-dry Protection
Should you accidentally operate the kettle without water, tthe kettle will
automatically switch off power. If this occurs, allow the kettle to cool prior to filling
with cold water and re-boiling.
Cleaning And Maintenance
Always disconnect the appliance from the power outlet and allow it to cool it down
completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture
to contact these parts.
2. Wipe the kettle’s body with a damp cloth or cleaner.Never use rough, abrasive
or poisonous cleanser.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter by
pressing down the filter’s tab inside the kettle, and replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle to prevent damaging the finish.
4. When not in use, or in storage, the power cord may be wound under the
bottom of kettle.
