* Build-in AC power supply is great for portability
* A DC power lead with alligator clips easily connects to many 12V DC power sources
* Easy to read LED shows battery voltage, charge current and capacity
* Push button controls and audible tones make for easy set up and control
* Reverse polarity protection and over-current protection ensure operation safety
AC Input:
For indoor use, the charger includes a built-in switching AC power supply that
delivers power by connecting the AC power cord to a common 100-240AC outlet.
DC Input:
This charger can be powered by a portable 12V DC power source. On the left side
of the charger, connect the DC power cord’s alligator clips directly to the output terminal.
Always match the poliarties (Red lead to red “ + ” terminal, Black lead to black “ - ” terminal).
To utilize the charger’s absolute maximum power capabilities, the DC power source must be
capable of delivering at least 5 amps while maintaining 12V DC.
WARNING! Never accidentally touch positive (+) and negative (-) input
connection together when connected to 12V DC power as it might result in
permanent damage to power source and charger.
Always connect the charger first, then connect the battery to charge lead.
100-240V AC 50/60Hz
11-18V DC, built in lead with alligator clips
Reverse polarity and current overload protection
134x110x60mm
269g
1-6S LiPo/LiFe
1-15S NiMH
0.1-5A
50W max.
Peak detection for NiMH, CC/CV for Lithiums
360 minutes(Defualt)
5mV
±5mV per cell
INPUT POWER
