4.4.1.2 Photocell’s settings
• The setting of the photocell represents the
photocell’s function
:
0
= start
1 - 8
= split times
9
= finish
• To see the
current setting
of the photocell, press the ON/OFF button anytime (short press only).
The setting will be displayed for 3s.
4.4.1.3 Setup menu
Use a long press of the Setup button (button in the middle - ENTER) to activate Setup Menu of the
photocell.
Function of the buttons in the Setup Menu:
•
Down/ Up button
- to change values in the submenu
•
ENTER
- Short press - to browse in the menu
•
ENTER
- Long press - to close the setup menu and save all new settings
!!
If you wish to save the new settings, make sure you long press ENTER button
!!
If the setup menu is activated and no buttons were pressed for more than 30s, the setup menu will
be closed and the new settings will be lost.
If you are in the Setup Menu you have 3 options:
1. Change the setting of the photocell (start, split, finish) =
GATE MODE
2. Setup the channel for communication (specific frequency) =
CHANNEL MODE
3. Change country in which TSS is used (different frequency ranges are used in different
continents/countries due to different norms) =
RF MODE
When you open the submenu, the LED light indicates a particular setting option.
To change settings use Up or Down buttons.
1.
GATE MODE
- choose from 0 to 9 (0 = start, 1 - 8 = split times, 9 = finish)
9
