5
Communication settings are independent of Template settings, and the TSS software
remembers the previously set communication settings.
Click Group / Persons to select a
group
(or a specific
person
).
Click “
APPLY
” and persons will be imported in the result table at the bottom of the program
window.
Click “
CONNECT
”
Connection is OK
program indication
- START button above the result table flashes green and red.
Photocell’s indication that the connection is OK - the top LED bulb flashes red while
the LED Power flashes green
THE MEASUREMENT
If the connection is OK, you have set a training/test and entered athletes, you can start the
measurement.
1.
Select a person
by click on their name. If you have RFID chips, after touching the
chip reader with a RFID chip bracelet, athletes will be switched automatically based
on their assigned chip.