Quad Quantizer Manual
Overview
The Quad Quantizer is a 4-channel CV quantizer with custom note selection, preset
scales, and selectable keys. For each channel, there is a CV input, trigger input, CV
output, and trigger output.
The back of the module
The rear of the module reveals:
(1) the PCB version
(2) the power header
(3) the ISP programming header
IMPORTANT
PCB revisions prior to VER 1.2 may
also have a label on the back of the
board saying “calibrate”. This label
points to a small tactile switch on the top
side of the lower PCB. This button is for
factory use to calibrate the module
before shipping. Do not press this
button as calibration requires an
accurate volt meter and voltage source.
If you have pressed this button, get in
touch with us and we can either talk you
through the recalibration process, or
arrange to recalibrate your module for
you.
3
2
1
3
TENDERFOOT ELECTRONICS
