background image

      Instruction Manual TWL54A Access Point 

Appendix I: Glossary 

Access Point(AP)

: Any entity that has station functionality and provides 

access to the distribution services, via the wireless medium(WM) for 
associated stations. 

Channel

: An instance of medium use for the purpose of passing protocol 

data units(PDUs) that may be used simultaneously,in the same volume of 
space,with other instances of medium use(on other channels) by other 
instances of the same physical layer(PHY),with an acceptably low frame 
error ratio(FER) due to mutual interference. 

SSID:

 Service Set identifier.An SSID is the network name shared by all 

devices in a wireless network.your network’s SSID should be unique to your 
network and idertical for all devices within the network.It is case-sensitive 
and must not exceed 20 characters(use any of the characters on the 
keyboard).Make sure this setting is the same for all devices in your wireless 
network. 

WEP:

 Wired Equivalent Privacy (WEP) is the method for secure wireless 

data transmission.  WEP adds data encryption to every single packet 
transmitted in the wireless network.   The 40bit and 64bit encryption are the 
same because of out 64 bits, 40 bits are private.   Conversely, 104 and 128 
bit are the same. 

 WEP uses a common KEY to encode the 

data.   Therefore, all devices on a wireless network must use the same key 
and same type of encryption.   There are 2 methods for entering the KEY, 
one is to enter a 16-bit HEX digit.   Using this method, users must enter a 
10-digit number( for 64-bit) or 26-digit number( for 128-bit) in the KEY 
field.   Users must select the same key number for all devices.   The other 
method is to enter a text and let the computer generate the WEP key for 
you. 

 However, since each product use different method for key 

generation.   It might not work for different products.   Therefore, it is NOT 
recommend to use.  

WPA/WPA2:

 A security protocol for wireless networks that builds on the 

basic foundations of WEP.It secures wireless data transmission by using a 
key similar to WEP,but the added strength of WPA is that the key changes 
dynamically.The changing key makes it much more difficult for a hacker to 
learn the key and gain access to the network.WPA2 is the second 
generation of WPA security and provides a stronger encryption mechanism 
through Advanced Encryption Standard(AES),which is a requirement for 
some government users.

26

Содержание TWL54A



































Отзывы: