Device Management
- 70 -
Parameter specification:
Header entry
Description
Loopback
Detection
Enable/Disable the loopback detection function.
After the function is enabled, if the port receives a BPDU message
forwarded by the port, the downstream equipment is considered as
giving rise to a loop, and the port is also set to Discard status.
Auto-Wakeup
Enable/Disable the auto-wakeup function.
Enable: When the wake-up time interval expires, the Discard port
enters into its Forwarding status and conducts detection over again.
Disable: When the port enters into its Discard status, the port
requires manual turn-on.
Wakeup Time
Interval
Set the wakeup time interval.
If the auto-wakeup is enabled, the Discard port enters into its Forwarding
status and conducts detection over again when the wake-up time interval
expires.
Specify Root Bridge
View the current root bridge status.
Parameter specification:
Header entry
Description
Bridge ID
Display the bridge ID of current switch, and comprise the system priority
and MAC address of the switch.
Root Bridge ID In the entire network spanning tree, it is selected to serve as a bridge ID
of root bridge device.
