T ADSL2+ Modem User’s manual
LAN_ACT Green Blinking
Transmission of data is being
process between computer or
NIC with T
On
A valid ADSL2+ connection
Blinking
An invalid ADSL2+ connection
ADSL_LINK Green
Fast
Blinking
Handshaking
ADSL_ACT Green Blinking
T is sending or
receiving data
1.4.2 Interface
LINE
LAN
RESET OFF
ON
AC 9V
Figure 1.2 T Rear Panel
Introduction of the panel is as follows: (from right to left)
Power jack:
AC
9V,1A
RESET:
There is a small round hole here, if you want to input default
setting, please use small stick to press this hole for 3 times
continuously, after this, all the indicators will be on then off,
and the system will reset and go back default factory setting.
(Note: Unless you want to clear the current information,
otherwise please don’t press this button.)
LAN:
RJ-45 port, use the cable to connect to the NIC of the user’s
4
