Concurrent Dual Band Wireless N600 Gigabit Router
Operation Instructions
PBC:
If you find the WPS LED blinking for 2 minutes after you press the hardware
WPS button on the device, it means that PBC encryption method is successfully
enabled. And an authentication will be performed between your router and the
WPS/PBC-enabled wireless client device during this time; if it succeeds, the wireless
client device connects to your device, and the WPS LED turns off. Repeat steps
mentioned above if you want to connect more wireless client devices to the device.
PIN
：
To use this option, you must know the PIN code from the wireless client and
enter it in corresponding field on your device while using the same PIN code on
client side for such connection.
Note:
The WPS encryption can be implemented only between your Router and
another WPS-capable device.
4.5.4
WDS Settings
WDS (Wireless Distribution System) feature can be used to extend your existing
2.4G or 5G wireless network coverage. Here we present you how to config such
feature in 2.4GHz, which also apply to 5GHz.
Select Repeater Mode to display below page:
AP MAC Address:
Enter the MAC address of a wireless link partner or populate
this field using the Open Scan option.
WDS Mode:
Select Disable or Repeater Mode.
For example: If you want to implement the WDS feature on 2 N60 routers labeled
N60-1 and N60-2 respectively, then first select “Repeater Mode” and follow steps
below:
44
