35
15 Editing channel list
You can adjust the channel list of your receiver to your personal
requirements. We suggest to group the channels by the satellites as
with the default channel list.
Select the channel list editor within the option "Sort Channels" in the
sub-menu "Channel list" in the main menu.
After completing your settings, exit the channel list with EXIT. Confirm
the subsequent prompt with OK to save that channel list.
To change the entries, select an entry in the list by pressing OK. A menu
with the available options will appear.
Select option "Block" in this menu if you wish to edit a complete block
of sequential channels. The menu will then disappear and you will be
prompted to highlight the end of the block in the list. Select the last
entry of the block and press OK. The menu with the available options
will then be displayed again.
The following functions are available within this menu:
Copy
Copies the channel to a different position in the
channel list. The existing entry in the target position
is overwritten.
Move
Moves the entry to a different position.
Note:
Moving an entry upward will insert it ahead of
the target entry, moving it downward will insert it
behind the target entry.
Delete
Deletes a channel from the channel list. The entry in
the list will be marked as unused. The numbering of
the remaining channels will remain unchanged.
