USING A SMARTPHONE OR TABLET
It is possible to operate the adjustment, memory and massage functions of the bed using an Andriod or iOS device (Apple iPhone or iPad)
with the Okin App available from Google Play Store or Apple App store.
1.
Search for and install “OKIN smart remote” in the Play Store
or AppStore
2.
Make sure Bluetooth is enabled on your device and open
the “OKIN smart remote” app
3.
When the app has opened and adjustment icons are
displayed swipe the screen from right to left and enter the
settings menu by pressing the cog symbol.
4.
Select “Select Device”, then select one of the devices, usually
listed as “OKIN-Receiver”. You will then return to the screen
with the adjustment icons.
5.
Again, swipe from right to left and enter the settings menu
by pressing the cog symbol.
6.
Select “General Settings”, then “select interface by item
number”, enter the code “83126” and press “OK”. Exit the
menu by pressing the back arrow at the top of the screen.
SUGGESTION: In the settings menu under “Device Settings and
Information” it is possible to change the device name, by selecting
“Rename Device”, from “OKIN-Receiver” to something that is
distinguishable, e.g. “MyTempurBed”. This is especially useful if
you have a king size or a super king size bed where both sides of
the bed can be adjusted independently.
There are two screens, to switch between them swipe left/right.
There are two screens, to switch between them swipe left/right.
The bed adjustment buttons will only work while they are pressed,
once released the adjustment will stop.
To store a memory position, press the “save memory position”
button and within two seconds select the “memory positions” button
you wish to store it as. To recall a memory position press and hold
the “memory position” button, the adjustment will stop once the
position is reached.
SET UP
APP FUNCTIONS - BED ADJUSTMENT
APP FUNCTIONS - MASSAGE
Back adjustment
up
Foot adjustment
up
Head and foot
adjustment up
Back adjustment
down
Foot adjustment
down
Head and foot
adjustment down
Memory positions
Save memory
position
Memory positions
Massage modes
Massage
speed/intensity
indicator
Settings menu
Child lock on/off
Floor lighting
on/off
Head end
massage
int/-
Foot end
massage
int/-
Massage off
Wave massage
mode
Massage on/off
Pressing and holding the memory position buttons will adjust the
bed to the stored positions. The adjustment will stop once the
position is reached or the button is released.
Massage modes 1, 2, 3 work in the same way as the on the
handset. The massage speed/intensity indicator will show which
intensity and speed the system is at.
Press the “massage on/off” button to start both head and foot
end massage motors. They will remain at a constant intensity. It
is possible to increase and decrease the intensity of the massage
motors independently by using the head and foot end massage
int/- buttons. Pressing the “massage on/off” button again
will stop the massage.
By pressing the “Wave massage mode” button the wave program
will start on the slowest setting, pressing the “Wave massage
mode” button again will increase the speed (but not the intensity)
up to three times before returning to the slowest speed. The intensity
is controlled by the head and foot end massage intensity buttons.
The floor lighting button and the child lock on/off work in the same
way as on the handset.
