Temptek CF Series Скачать руководство пользователя страница 42

Страница: 42 / 84

CF Series Portable Chiller : Air & Water-Cooled : 5 - 40 Tons

Page: 42

TEMPTEK, INC.

525 East Stop 18 Road Greenwood, Indiana 46142

317-887-6352 Fax: 317-881-1277

Email: [email protected]

All control instruments used in Advantage water chillers are covered by the machine’s

warranty. Proprietary “tailor made” instrument are manufactured specifically for

Advantage.

If you experience problems with your control instrument, it’s as easy as 1-2-3 to

execute our repair or replacement system in order to get your equipment running.

IN WARRANTY SERVICE INCIDENT

Call Service at 317-887-0729 for diagnostic assistance.

If a control instrument is determined to be at fault, a new or reconditioned

instrument will be sent as a replacement.

Return the defective instrument freight pre-paid for a full credit. If the faulty

instrument is not returned you will need to pay for it.

OUT-OF-WARRANTY SERVICE INCIDENT

Call Service at 317-887-0729 for diagnostic assistance.

If a control instrument is determined to be at fault, you will be referred to the

instrument manufacturer, you have 3 options:

Purchase a new instrument as a replacement.

Send your instrument back for repair, freight prepaid. For a nominal fee

(contact factory for current fees) your instrument will be repaired and

returned.

Purchase a new instrument and repair the old one as a back up.

If you are sending your instrument back for repair include this form in the box.

Do not disassemble the instrument.

OTHER INFORMATION

Repair Warranty: 1 year.

Ship to: Temptek 525 East Stop 18 Road Greenwood, IN 46143

Attention: Repairs. (317-887-0729)

Include in box: part, purchase order, contact name, phone number, symptom (if

available).

For Priority Service, send the instrument to us via overnight shipment. We usually

repair these instruments the same day we receive them!

Содержание CF Series





















































































Результаты поиска

Содержание CF Series

Отзывы:

Бренды по названию

Популярные бренды

Temptek CF Series, Инструкция по эксплуатации

Результаты поиска

Содержание CF Series

Отзывы:

Бренды по названию

Популярные бренды