.24.
INSTRUCTION MANUAL
LIGHTING ON/OFF BUTTONS BACKLIT AND DISPLAY WINDOW
o All buttons backlit will light on when plugged;
o All buttons backlit except the Power button will light off automatically if no more
touching on the Control Panel within 15 seconds from the final operation;
o If the Display Window is set to Power Saving Mode, the window will be light off
automatically if no more touching on the Control Panel within 60 seconds from
the final operation;
o All buttons backlit will light on with a sound of beep if any pressing on any
buttons except the appliance is on standby condition;
o If the Display Window is set to Power Saving Mode, it will light on with a sound
of beep if any pressing on any buttons;
POWER SAVING MODE FOR STZ60SB AND STZ60SX
o The Display Window is with Power Saving Mode, the default mode is "off", the
Screen mark
will light on to indicate the Display Window will light on always;
o To turn on the Power Saving mode, make sure the control panel is
under locked condition;
o Press the light button
for 3 seconds, a beep will sound, the
Screen mark
will light off to indicate the Display Window is on
Power Saving Mode;
o Your setting will be saved as new default mode unless to re-set it.
OVERHEATING WARNING FOR STZ60SB AND STZ60SX
o The Overheating Warning will be activated automatically when the
temperature in cabinet goes up to more than 25°C(77ºF) included and
last for more than 3 hours, at the same time, the buzzer alarm will
sound loudly, the lighting inside will flash, the Warning mark
will
light on, the digital
will show 25°C or 77ºF and flash once each 2
seconds, in such case, pls.call your local after-sale service
immediately;
o The Overheating Warning will be turned off automatically when the temperature
in cabinet goes down less than 25°C(77ºF) and last for more than 2 minutes;
