.10.
During First Use
IMPORTANT: When you use the Wine Cooler for the first time or restart the
appliance after it has been turned off for a long time, there could be a few
degrees variance between the temperature you set and the one indicated
on the LED display (If it is set to display Actual Temperature). This is normal
and it is due to the length of activation time. Once the Wine Cooler has
been running for a few hours everything will be back to normal.
o When you first switch on the appliance, the compressor will run
continuously until the Wine Cooler reaches a cool enough temperature.
o During this period of time, you should try not to open the door frequently
or place bottles inside of the appliance.
o If the unit is switched off or unplugged, you must allow at least
5 minutes
before restarting the appliance or reconnecting it to your mains supply.
Locking/Unlocking The Control Panel
o To unlock the control panel, press the lock button
3 seconds
,
the lock mark on the screen will be light off with a beep
sounded;
o To lock the control panel, press the lock button for
3 seconds
again, the lock mark on the screen will be light on with a beep
sounded;
o Note: System will be in unlocking state by default once the appliance is
powered up and energized. Indicator LED9 lights when system is locked.
System has no automatic locking and no automatic memory either.
Setting The Temperature Range
Single Zone
o The appliance is with 1 temperature range, the range of Single Zone is
5-20 ºC (41-68 ºF)
.
o Includes model OZ60SB and OZ124SB
Dual Zone
o OZ60DB, OZ60DX and OZ60DW are with 1 temperature range, the range
of both Upper Zone and Lower Zone is
5-20 ºC (41-68 ºF)
.
oOZ90DB, OZ90DX, OZ90DW and OZ124DB are with 2 temperature ranges,
the range of Upper Zone is
5-12ºC (41-54 ºF) ,
and
12-20 ºC 54-68 ºF)
for
lower Zone.
