TempSen warrants this TempSen-branded hardware product against defects in materials and workmanship under normal use for a period of ONE
(1) YEAR from the date of shipment (“Warranty Period”). If a hardware defect arises and a valid claim within the Warranty Period, as its option
and to the extent permitted by law, TempSen will either (1) repair the hardware defect at no charge, using new parts or parts equivalent to new in
performance and reliability, (2) exchange the new product with a product is new or equivalent to new in performance and reliability and is at least
functionally equivalent to the original product, or (3) refund the purchase price of this product. TempSen may request that you replace defective
parts with new or refurbished user-installable parts that TempSen provides in fulfillment of its warranty obligation. A replacement product or parts,
including a user-installable part that has been installed in accordance with instructions provided by TempSen, assumes the remaining warranty
of the original product or ninety (90) days from the date of replacement or repair, whichever provides longer coverage for you. When a product
or part is exchanged, any replacement item becomes your property and the replaced item becomes TempSen’s property. Parts provided by
TempSen in fulfillment it’s warranty obligation must be used in products for which warranty service is claimed. When a refund is given, the product
for which the refund is provided must be returned to TempSen and becomes TempSen’s property.
EXCLUSIONS AND LIMITATIONS
This Limited Warranty applies only to the hardware product manufactured by or for TempSen that can be identified by the “TempSen” trademark,
trade name, or logo affixed to it. The Limited Warranty does not apply to any non-TempSen hardware product or any software, even if packaged
or sold with the TempSen hardware. Manufacturers, suppliers, publishers, other than TempSen, may provide their own warranties to the end
user purchaser, but TempSen, in so far as permitted by law, provides their products “as is”. Software distributed by TempSen with or without the
TempSen brand name (including, but not limited to system software) is not covered under this Limited Warranty. Refer to the licensing agreement
accompanying the software for details of your rights with respect to its use.
TempSen does not warrant that the operation of product will be uninterrupted or error-free. TempSen is not responsible for the damage arising
from failure to follow instructions relating to the product’s use.
This warranty does not apply: (a) to consumable parts, such as batteries, unless damage has occurred due to a defect in materials or
workmanship; (b) to cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (c) to damage caused with non-
TempSen products; (d) to damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes; (e) to damage caused by
operating the product outside the permitted or intended uses described by TempSen; (f) to damage caused by service (including upgrades and
expansions) performed by anyone who is not a representative of TempSen or TempSen Authorized Service Provider; (g) to a product or part that
has been modified to alter functionality or capability without the written permission of TempSen; or (h) if any TempSen serial number has been
removed or defaced.
IMPORTANT: DO NOT OPEN THE HARDWARE PRODUCT. OPENING THE HARDWARE PRODUCT MAY CAUSE DAMAGE THAT IS NOT COVERED
BY THIS WARRANTY. ONLY TEMPSEN OR AN AUTHORIZED SERVICE PROVIDER SHOULD PERFORM SERVICE ON THIS HARDWARE PRODUCT.
Quick Guide
8> Warranty
T: +86 21 6768 5210 F: +86 21 6768 5232 E: [email protected] W: www.tempsen.com
Please call us at +86 21 6768 5210 or send email to
[email protected] for technical assistance.
Please follow local regulations when recycling or disposing of ITAG4 data loggers.
Click
button to step through following recording statistics:
▼ Home Screen
▼ Logging Statistics
▼ Actions
1 Overall Alarm Status:
Alarm OK
2 Alarm Status for each alarm zone
3 Name of alarm triggered zones
4 Limit violated indicator
1
5 Sensors:
T
Temperature,
RH
Relative Humidity
2
6 Current reading:
-12.8
o
C
7 Running Status:
Recording
1 Max, Min, Avg Value
Alarm Zone:
H1(High)
Temperature
1 Status:
Alarm
2 Limit violated
3 Violation duration time:
2 days 16 hours 23 minutes
6> LCD Messages
À
1
Limit violated indicator shows when temperature exceeded any high or low alarm limits
À
2
Humidity sensor only applicable to ITAG
®
4 TH
7> Important Usage Information
Alarm Zone:
L1(Low)
Humidity
1 Status:
Alarm
2 Limit violated
3 Violation duration time:
6 hours 4 minutes
À
Connecting to PC
À
Generating PDF Report
À
Error
• Please
DO NOT
use the logger if there is no LCD response or Error appears on LCD
after started.
• If there is error after configuration, please try to re-configure ITAG4 data logger to
eliminate error.
• Data stored in ITAG4 data logger is retrievable after battery ran out.
• ITAG4 data logger contains CR2032 lithium battery, please do not heat, microwave or
recharge it.
• ITAG4 data logger could not be configured again after started.
7
1
6
2
4
5
1
2
3
2
1
3
Alarm Zone:
L1(Low)
Temperature
1 Status:
OK
2 Limit violated
3 Violation duration time:
15 minutes
©2019. All rights reserved, TempSen Electronics Company
ITAG
®
4
/ BIO / TH
Data Recoding Indicator
1 2
3
