Tempo Fitness TP-U1050, Руководство пользователя

Страница: 9 / 20

.
FUNCTIONAL BUTTONS:
MODE - Push down for selecting functions.
SET - T o Set the consumer movement of time
、
distance
、
calories and hand pulse.
RESET - For resetting
consumer movement
of time
、
distance
、
calories and hand pulse.
FUNCTION AND OPERATIONS:
1.SCAN:
Press “MODE” button until “SCAN” appears, monitor will rotate through all the 5
functions: Time
、
speed
、
distance
、
calorie ODO and pulse. Each display will be hold 6 seconds.
2.TIME: (1) Count the total time from exercise start to end.
(2) Press “MODE” button until “TIME” appears, press “SET” button to set exercise time. When
the “set” is zero, the computer will alarm 15 seconds.
3.SPEED: Display current speed.
4.DIST: (1) Count the distance from exercise start to end.
(2) Press “MODE” button until “DIST” appears. Press “SET” button to set exercise
distance. When the “set” is zero, the computer will alarm 15 seconds.
5.CALORIES: (1) Count the total calories from exercise start to end.
(2) Press “MODE” button unit “CAL” appears. Press “SET” button to set exercise
calories. When the “set” is zero, the computer will alarm 15 seconds.
6. ODO
：
Monitor will display the total accumulated distance.
7. PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please place
your palms of your hands on Both of your contact pads and the monitor will show your
current heart beat rate in beats per minute(BPM) on the LCD after 6~7 seconds. Remark:
During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2~3 seconds, then will return
to normal level. The measurement value can not be regarded as the basis of medical
treatment.
Press “MODE” button until “PULSE” appears. Press “SET” button to set exercise pulse.
The
setting values of 40-240 RPM , the consumer computer alarm when heart rate is below the SET
value.
NOTE
：
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes .
SPECIFICATIONS:
FUNCTION
AUTO SCAN
Every 6 seconds
TIME
00:00’~99:59’
CURRENT SPEED
The maximum signal can be pickup is 99.9KM/H
TRIP DISTANCE 0.00~99.99KM or 0.00~9999KM
CALORIES 0.1~999.9kCAL
ODO 0.1~999.9KM or 1 ~ 9999KM
PULSE RATE 40~240BPM
BATTERY TYPE 2pcs of SIZE –AA or UM –3
OPERATING TEMPERATURE 0°C ~ +40°C
STORAGE TEMPERATURE -10°C ~ +60°C
www.johnsonhealthtec h.com.au