Rev. 11/10/00
29
14. The Leakage (RX10K) mode can be used with CO battery on the line.
T
F
15. In the Stress test, an acceptable reading would be in the range of:
a) 0-90 dBrnC
b) 40-70 dBrnC
c) 35-50 dBrnC
d) 0-30 dBrnC
16. Which test is used to check for capacitive imbalance in a pair?
a) Resistance test
b) Leakage test
c) Kick test
d) None of the above.
17. Except for Inside wiring, how much cable beyond the fault is needed on a
single conductor fault to ensure a good reading?
a) none
b) 10,000 feet
c) 5,000 feet
d) 1,000 feet
18. In the Stress test, a good ground can be identified with a reading:
a) greater than 70
b) less than 70
19. A decrease in meter reading when using the Stress test indicates that
the Sidekick is getting closer to the fault.
T
F
20. If a customer goes off-hook during a Stress test on their line, they will hear
the simplex tone being generated if the line is good.
T
F
