Tempo Fitness FSP200 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 41

Tempo Fitness FSP200 Скачать руководство пользователя страница 27

FSP200

27

Tempo Communications Inc.

1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155

Maintenance INFO

• Total Fusion Count: Displays the total number of splices made on the fusion splicer.

• Software Version: Diplays the software version of the splicer.

• Serial Number: Displays the fusion splicer serial number.

The FSP200 can make and save up to 100 screen shots. To make a screen shot:

1. Press and hold the Menu key.

2. Press Enter to confirm.

Set

This menu is used to set system settings.

Language

Navigate to select the desired language.

Beep Switch

Set or disable the beeper notification.

Screen Direction

Set for front or back operation.

LCD Auto Turn-Over

Enable or disable the splicer for the LCD to display the splice screens when the LCD screen is tilted to a different axis.

Auto Heat Switch

When enabled the heater will automatically start when the heater door is closed.

Power Save

The Power Save function conserves energy by turning off the LCD and/or the entire splicer.

Monitor Shut Down

The user can select or disable when/if the LCD can be turned off after a period of inactivity. The time is adjustable from 0-20

minutes.

Splicer Shut Down

The user can select or disable when/if the LCD can be turned off after a period of inactivity. The time is adjustable from 0-20

minutes.

LCD Brightness

The brightness of the LCD can be adjusted to compensate for ambient lighting conditions.

Set Calendar

The date and local time can be set.

«
...
25
26
27
28
29
...
»

Содержание FSP200










































Отзывы:

Нет отзывов