Tempo Fitness E902, Руководство пользователя

Страница: 10 / 19

18
19
E903 ASSEMBLY
STEP 1 STEP 3
STEP 2 STEP 4
HARDWARE CONTENTS: HARDWARE CONTENTS:
HARDWARE CONTENTS: HARDWARE CONTENTS:
Long Bolt (A)
M8×70 2 pcs
Long Bolt (A)
M8×70 2 pcs
Nut (B)
M8 2 pcs
Nut (B)
M8 2 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 2 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 4 pcs
Wavy Washer (C)
Φ8.5XΦ22XT1.5 2 pcs
A. Open hardware for step 1.
B. Attach the Front Stabilizer Tube to the Main
Frame using 2 Long Bolts (A) , 2 Wavy
Washers (C) and 2 Nuts (B).
A. Open hardware for step 3.
B. Carefully connect lower and upper console
cable.
C. Once all cables are connected, position
Console Mast
and assemble using 4
Hex
Screws (D) & 4 Wave Washers (C) .
A. Open hardware for step 2.
B. Attach the Rear Stabilizer Tube to the Main
Frame using 2 Long Bolts (A) , 2 Wavy
Washers (C)
and 2
Nuts (B).
A. Open hardware for step 4.
B. Insert Upper Handlebar Axle through Console
Mast pivot point. Then slide onto Handlebar
Axle
1
Pivot Wavy Washer (H)
.
C. Slide into position left hand side Upper
Handlebar and fix in place using 1 Hex Screw
(E) , 1 Spring Washer (G) and 1 Pivot Flat
Washer (F)
.
D. Repeat steps B-C on the opposite side.
Hex Screw (E)
M8×20, 2 pcs
Pivot Flat (F)
Washer, 2 pcs
Spring Washer (G)
Φ8, 2 pcs
Pivot Wavy Washer (H)
Φ30xΦ13xT0.3, 2 pcs
Hex Screw (D)
M8x15 4 pcs
FRONT STABILIZER TUBE MAIN FRAME
MAIN FRAME
REAR STABILIZER
TUBE
A
A
C
C
B
B
CONSOLE
MAST
UPPER HANDLEBAR
HANDLEBAR AXLE
CONSOLE
CABLE
C
D
H
F G E