OFL100
15
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Optical Loss Test
The optical loss test allows the technician to measure
the insertion loss of passive optical components.
To measure insertion loss:
6HWWKH230DQG6/6WRWKHGHVLUHGZDYHOHQJWK
&RQQHFWWKH6/627'5SRUWWRWKH230SRUW
3UHVV5HIHUHQFH7KH5HO3RZVKRXOGEHG%
,QVHUWGHYLFHWREHPHDVXUHG
5HDGWKHORVVRIWKHGHYLFHXQGHUWHVWXQGHU5HO3RZ
Laser Source
7KH2)/SURYLGHVD&:VWDELOL]HGOLJKWVRXUFH
that is 1310nm or 1550nm. These can be used with a
FRPSDWLEOH230WRPHDVXUHLQVHUWLRQORVVRIƬEHURSWLF
OLQNV$WRQHFDQEHLQV]+]N+]DQG
N+]WRDLGLQƬEHULGHQWLƬFDWLRQ
Open:
Turns the laser source on.
Wavelength:
Allows the technician to set the
wavelength of laser source.
0RGH
6HWWKHODVHUIUHTXHQFH\EHWZHHQ&:+]
+]N+]DQGN+]
Power + :
Increase the output power.
Power - :
Reduce the output power.
The slider bar at the bottom of the screen can be used
WRDGMXVWWKHRXWSXWSRZHU
WARNING
Avoid looking directly at the laser output port;
permanent eye damage may occur
RJ45 Sequence Testing
Connect the cable under test to LAN2 port and the
RWKHUHQGWRWKHUHPRWHVRFNHWRQWKHERWWRPRIWKH
instrument. Straight connect and Interleaved type
cables can be tested.
Direct Cable Test
: The indicators of the host and
UHPRWHZLOOƮDVKRQHDWDWLPHIURPWR
,QWHUOHDYHG&DEOH7HVW
The indicators of the host and
WKHUHPRWHZLOOƮDVKRQHDWDWLPHLQWKLVRUGHU
4,5,2,7,8.
Both T568A and T568B cables can be tested.
Do not connect live cables to the OFL100. Doing so may
result in permanent damage.
