5
measured temperature exceed
37.5
/99.5
, which is a warning
℃
℉
for patients that he/she may have a
fever
or
or
Ready for detection, the relative
symbol shall twinkle.
1. The measured value exceeds
100
/212.0
under ear
℃
℉
temperature mode.
2.The measured value exceeds
42.2
℃
/107.9
℉und
er forehead
temperature mode.
3 short tick and green
backlit for 3seconds.
1. The measured value exceeds
0
/32.0
under ear
℃
℉
temperature
mode.
2. The measured value exceeds
32
℃
/89.6
℉u
nder forehead
temperature mode.
3 short tick and green
backlit for 3seconds.
Inquiry for memory data, Storing 20 groups of data
LCD
display
Operational method and instruction for
displays
Sound and
backlit
Click button F2 for 4-8seconds and LCD
displays “- - -” with M signal twinkling.
silence
Click button F2 again and the LCD displays
the first data group with M signal twinkling.
Click button F2 and it shall display the serial
number for 1 second and then display the
measured data and mode icon. There are 20
groups of data.
silence
2
●The device is not continuous monitoring device.
●Dual-mode Infrared Thermometer is not waterproof. Please do not
douse it into water or other liquids. Cleaning and disinfection procedure
comply with the instructions specified in [cleaning and storage]
●Please do not use the product if the temperature sensor or the
Dual-mode infrared thermometer shows any sign of damage. Do not try
to repair the product if it is damaged. Please contact Customer Service.
●Dual-mode Infrared Thermometer consists of precision parts with high
quality. Please avaoid sharp shocks to or dropping the thermometer.
Do not twist the Dual-mode infrared thermometer and the temperature
sensor.
●
Operating Conditions:
Temperature: 10
C to 40
C
Humidity: <80% RH, non-condensing
Atmospheric pressure: 860hPa to 1060hPa
●
Storage and Shipping Conditions:
Temperature: -10
C to 60
C
Humidity: 0 - 95% RH, non-condensing
Atmospheric pressure: 860hPa to 1060hPa
●
Battery Installation:
Put the two AAA batteries into battery compartment in correct polarities.
Push the battery cover horizontally along the arrow.
Notes:
☆
If you are the first time using the thermometer, please pull out the
Plastic sheet .
☆
Battery polarities should be correctly installed. Otherwise, damage
may be caused to the device.
☆
Please put in or remove batteries in right order, or may cause
damage to the device bracket.
☆
Please remove the batteries if the thermometer will not be used for a
long time.
Warnings
●Please keep this Dual-mode infrared thermometer out of children’s
reach
●Medical assistance can’t be replaced by the use of infrared Dual-mode
infrared thermometer
