7
TEMPEST Cyclone Manual
Available Accessories for TEMPEST Cyclones
5. Ecogate™ Automatic Dust Collector and Blast Gate Switch -
ECOGATE4
The ECOGATE™ system opens your blast gate and turns on your
cyclone when you turn on your woodworking machine, then shuts the
gate and turns off the cyclone when the machine is switched off. For
1HP @ 110V or 1-1/2HP and 2HP @ 220V collectors.
6. Cyclone Muffler - TEMUFF-6
Reduces cyclone sound by 50% (10db) without effecting machine
performance. Attaches between cyclone and filter. Requires hose to
connect. Length of muffler with flanges is 23-3/4" and has a 6"
diameter connection.
7. Dust Level Sensor - BINSENSOR
Sounds an alarm when your cyclone's bin is full
No more guessing about the dust levels in your cyclone's collection
drum.A rotating paddle mounts through the lid of your container and
activates the sensor when the paddle is stopped by a high sawdust level.
Includes a 110V power cord and a relay connection that can activate an
external devise such as a visible light bulb.
8. Dual Drum Kit - CYDDK
Double the amount of dust you can collect before you have to empty
your drums.
Includes:
7" wye and cyclone connector, a 7" connection
hose, two flanges, & band clamps. Adds 12" height to cyclone.
9. 26 gal. Fiber Drum - CYDRUM26
A great low profile high capacity container. Lid removes easily with
clamp release.
10. Table Saw Dust Collection Guard - TSGUARD
This Guard is the ideal solution for table saw safety and dust control.
When connected to a dust collection system, the PSI Dust Collection
Guard captures the dust thrown up by your table saw blade. The
Guard can be used on any table saw with an extension table. It is
very easy to install and easily swings out of the way. A unique
counter-balance allows
for f
ast and easy positioning.
11. Dust Grabber Downdraft Table - DGTABLE2
The Dust-Grabber sanding table captures the dust before it enters
the air you breathe.
• Non-slip perforated, non-marring surface.
• Strong, laminated hard board construction.
and ea
sy positioning.
4. Long Ranger MultiGate Switch System - LRMSET220
Turn on your cyclone when you open your blast gate.
Never forget to turn your dust collector on or off. Make it automatic
when your cyclone is wired to the MultiGate™ switch system.
2. Heavy Duty Spiral Pipe
(24 gauge) The inside of the pipe is very smooth while the continuous
outside seam provides superior support and strength. Large ends
adapts to small end coupling and fittings. Available in 5' lengths only.
1. 26ga Snaplock Pipe
Snaplock metal pipe is economical, smooth, and practical. It is
delivered open and flat–snap it together and lock it along the length of
the pipe’s seam to make your pipe. It is an easy cut to length with
shears. Available in 5' lengths only.
3. Long Ranger Remote Dust Collector Switch - LR220-3
Save yourself the inconvenience of walking over to turn on your
cyclone when you find you’re in the middle of a critical project. Simply
press the transmitter on/off button to easily switch your cyclone on or
off.
1
2
7
8
9
10
5
6
3
4
11
Accessories
