LIZA Enclosure User Manual
page 6
Suspended Ceiling
1.
Remove ceiling tiles
2.
Attach the looped ends of all four Gripple wires around structural members above the
ceiling tiles. If there are no suitable attachment points, you will need to add them, in
accordance with local building codes.
Take the looped end of the Gripple wire and thread it around a structural support in the ceiling, rated
for the weight of the LIZA enclosure and projector.
3.
IMPORTANT: In order for the projector to be held securely without movement, the Gripple
wires must attach to hanging points that are OUTSIDE the footprint of the LIZA enclosure,
using an angle 20-30 degrees from vertical.
4.
Thread the Gripples onto the four eye bolts on the enclosure base and tighten until the
enclosure is level and its base is touching the ceiling T-bars
5.
Do not replace tiles until installation is complete.
20-30˚
