04/05 Pamphlet No. 2487
© temperzone limited 2005
Страница 1: ...iod is required to allow the crankcase heaters to drive any liquid refrigerant out of the compressor oil 2 Check that the shipping block beneath the compressor has been removed and that the compressor is secure on its mounts 3 Check that all fan motors are free running 4 Check that the thermostat is correctly wired to the unit and is set at the desired temperature 5 Check that the air filters have...
Страница 2: ...a is available on request Note Supply and return air spigots are shipped loose inside the return air cavity 3 Check compressor compartment for oil stains indicating refrigerant leaks Three Monthly or every 1200 hrs of operation Check the indoor unit s fan belt tension and adjust if necessary Six Monthly 1 Check the tightness of electrical connections 2 Check the tightness of fans motor mountings p...
Страница 3: ... is available on request Note Refer to Fig 1 for overall dimensions and Fig 4 for further plinth dimensions OPA 300R DIMENSIONS mm Not to Scale PROJECTION 125 60 471 RETURN AIR 447 800 558 53 321 53 53 53 SUPPLY AIR 1344 INSIDE 1599 INSIDE OPA UNIT SEALER STRIP SUPPLIED ROOF MOUNTING PLINTH 53 125 FLASHING ROOF MOUNTING 50 MAXIMUM TYPICAL CORNER ASSEMBLY FLASHING INSEAL PLINTH ASSEMBLY ANGLE HOLD ...
Страница 4: ...04 05 Pamphlet No 2487 temperzone limited 2005 ...
