13 |
ZPOINT Rev 1.0 | http://www.temperaturealert.com/ | © 2013 Temperature@lert
ZPoint Jacks and Connectors
On the side of the unit, you’ll find the majority of the connectors and jacks
(see figure 2):
Antenna –
The swivel antenna is connected via a threaded SMA mount.
Power Switch –
This switch is used to control the different operating modes of
the device (See operating modes).
Built in Sensor
– The TM-ZP200 includes a built in temperature sensor. The
TM-ZP200-TH includes built in temperature and humidity sensors.
Sensor Jack 1 & 2
– The sensor jacks accept Temperature@lert environmental
sensors. The unit will monitor up to two external sensors. The one exception is
our combination temperature/humidity sensor. This sensor uses a single jack
and provides you with both temperature and humidity effectively doubling the
sensor capacity of the jacks. Most of the external sensors we sell are
compatible with this unit such as temperature, temperature/humidity, flood,
dry contact, 4-20mA, 0-5VDC, etc. Please visit TemperatureAlert.com for a
complete list of compatible sensors.
