Page
2
of
9 user guide v 2.0
C
HANGING THE
B
ATTERIES
10
T
ROUBLESHOOTING
10
Hardware Guide
Cellular Edition At a Glance
The Temperature@lert Cellular Edition is a remote environmental monitor that measures conditions
such as temperature and humidity at its location every few minutes. Each sensor reading is transmitted
via the mobile phone network to our 24/7 monitoring system and secure web site. If the temperature
goes too high or too low, the system will call, email or text message you. The Cellular Edition can use
either wired sensors (connected directly to the unit) or ZPoint wireless sensors. Each Cellular unit can be
linked to 15 ZPoint wireless sensors. Each ZPoint sensor has two additional jacks for external sensor add-
ons. If the power ever goes out, the unit will continue to operate on the built-in battery backup. If the
monitoring website ever fails to hear from the unit, you will receive an alert to check the device. Either
way, we want you to know that we’ve got you covered.
Temperature@lert Cellular Edition requires a
monthly or annual monitoring plan for operation. If you purchased your unit from a reseller, you may
need to call Temperature@lert at 866-524-3540 or email [email protected] to subscribe
to a plan.
The Temperature@lert Cellular Edition includes the following items:
Setting Up the Hardware
Simply connect the unit to any AC outlet to power on the device and the unit will begin operating. After
ten seconds, temperature readings will automatically begin transmitting. The unit is operating correctly
if you do NOT see the red failure light blink.
Verifying Wireless Signal Reception
Your Temperature@lert Cellular Edition transmits temperature reading via the Verizon and Aeris(for
