9
Pre-configured programs in Chrono mode
KEYBOARD LOCK
This function allows the user to lock the keyboard to prevent accidental changes. All buttons on the
remote control are locked. To activate the key lock function, press [Prog] for 3 seconds. To deacti-
vate the function, repeat the procedure. As a safety feature, you can always turn off the device by
pressing the [on/off] key, even when the keypad is locked.
OPEN WINDOWS FUNCTION
The device allows detecting the presence of an open window to limit energy consumption, to acti-
vate this mode, activate Standby Mode, press the [Chrono] key for more than 3 seconds, you can
scroll through the modes with the [+] key and select FUNC with the [Prog] key, the window icon will
flash in the upper left corner of the screen, using the [+] key select ON / OFF, visible in the center
of the screen, and confirm with [Prog]. The icon
will be active during thermostat operation, if the
open window is detected, the icon will blink and the system will turn off the heating for a maximum
of 30 minutes or until a temperature rise of at least 1.5 ° C.
ASC FUNCTION
This function allows you to optimize the operating times of the device, to limit consumption, acti-
vating this mode, the device will record the time necessary to bring a specific room to the specific
temperature, adjusting its operation automatically, in this way the thermostat can be activated later
of a programmed time if it is possible to reach the desired temperature in less time than foreseen by
the operation with the time intervals that have been established. Activate standby mode, press the
[Chrono] key for more than 3 seconds, cycle through the modes with the [+] key and select FUNC
with the [Prog] key, press it until the icon
appears at the top of the screen, select ON with
the [+] key and press [Prog] again to confirm. After a few seconds, the remote control automatically
returns to standby mode.
ECO MODE (Function only available via optional remote control)
This mode reduces electricity consumption to 3 ° C (Comfort - 3 ° C). In standby mode, press the
[Chrono] key for more than 3 seconds, scroll with the [+] key and select FUNC with the [Prog] key,
press it until the ECO icon appears, select ON with the [+] button and press [Prog] again to confirm.
After a few seconds, the remote control automatically returns to standby mode.
CONSUMPTION INDICATOR
This useful feature shows the current electricity consumption level depending on the set temperatu-
re. The three coloured icons on the display (green, yellow and red) correspond to low, medium and
high consuption respectively.
Monday-Friday
Monday-Friday
Monday-Friday
Weekend
Weekend
Weekend
