Nozzle Kits
PARTS LIST
(1) Condensate Pump with mounting hardware
(1) 3/8
-
inch drain hose, 20 ft
(2) Mounting screws
(1) Drain hose — black corrugated
(2) Hose clamps
Pump Kit
12
ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY
The optional discharge nozzle kits are used to direct the
conditioned air to a specific target area. By concentrating the
airflow, the nozzles increase the air velocity towards production
lines to cool personnel and/or equipment. In server rooms, the
nozzles can be used to direct the airflow through the rack, and
remove the hot air from the equipment area.
NK
-
OH
1
for model
TC-12HP
, with (2) 4-inch diameter nozzles
with an approximate compressed length of 15 inches. The
approximate extended length is 21 inches.
NK
-
OH
2
for models
TC-18HP
and
TC-24HP
with (2) 6-inch
diameter nozzles with an approximate compressed length of 22
inches. The approximate extended length is 32 inches.
NK
-
OH
3
for
TC-36HP
and
TC-60HP
, with (2) 8-inch diameter
nozzles with an approximate compressed length of 20 inches. The
extended length is approximately 29 inches.
The nozzle kits come pre-assembl
ed
with the nozzles secured to
a mounting plate, and with edge guards. By removing the
HP-Series
discharge grille, you can insert the nozzle kit into the
opening without the use of tools.
CONDENSATE PUMP KIT
A plug-in condensate pump kit is available for applications where emptying the 5 gallon
condensate tank is not practical. The pump kit consists of a condensate pump with
mounting hardware and electrical connections, along with the tubing required for the drain
and discharge of the condensate water.
The condensate pump provides for the automatic
removal of condensate water during the cooling
process. The pump is capable of pumping to a
20 foot height, allowing for the routing of the drain line
above the drop-ceiling to a nearby drain. The pump
is controlled by an internal float-switch/check valve,
which turns the pump on and off automatically. The
pump is also equipped with a condensate over-flow
safety switch, that will cycle the compressor off when
the pump is not working properly.
Kit
Voltage
PC
-
OH
1
115V
PC
-
OH
2
208
-
230V
(TC-60HP
models come with
pumps installed)
Содержание TC-12HP
