TO USE THE PROJECTION CLOCK
Press PROJECTION button to turn on or off the projection clock. Turn the focus knob on the projector
to adjust the image of the projected time onto the wall or ceiling.
TO USE THE HI-LO-OFF DIMMER
This clock radio features an adjustable display backlight with “high / low / off” settings. To select a
backlight setting, press
SNOOZE/DIMMER
one at a time until the brightness is reached. This can
only be done when the radio is off.
Note: Please note the always-on backlight will not work while the clock is operating on battery power.
TO SET UP THE FM ANTENNA
Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or
attach to other antennas.
TO TUNE AND PLAY THE RADIO
Press
SLEEP/RADIO
, the LCD will show “
ON
” for few seconds and then shows the radio frequency
readings in
Mhz.
1. Pr ess / to tune into a desired radio station. To scan the stations, press / for a
few seconds and release. The radio will search and stop on the next strong station.
2. Pr ess
once, the LCD shows “
VOL
“, press / to adjust volume from 0 (minimum) to
15 (maximum)
3. Pr ess
SNOOZE/DIMMER
to turn off the radio.
Remark:
keep your radio away from fluorescent lamps, which may cause interference to the radio.
TO USE THE MEMORY SET (RADIO PRESET) FUNCTION
This clock radio features a total of 10 preset memory of FM radio .These allow you to preset your
favorite stations and access them quickly.
1. Turn on the radio by press of
RADIO / SLEEP
. Press / to select a radio station you
like to preset memory.
2. Press and hold the
SET / MEM
until “
MEM
” appears and “
01
” flashes below the time digits.
Press and hold
SET / MEM
until “
01
” stops flashing. The preset is now stored in Memory
01.
3. Pr ess / to select another station you like to preset. Then press and hold
SET / MEM
until “
MEM
” appears and “
01
” flashes below the time digits. Press
SET / MEM
once, “
02
”
appears. Then press and hold
SET / MEM
to store Memory 02.
To move to next preset without storing, repeatedly press the
SET/MEM
button.
4. Repeat Step 2 - 3 to preset up to ten FM stations.
5. To listen to a preset station at any time, simply press the
SET / MEM
to select a preset
station while the radio is on.
6. To edit a preset station, select another station and then repeat Step 2-4. This overrides the
original setting.
UK. 4
