TEMA TELECOMUNICAZIONI
Paging Microphone Base for Announcements and Chime
MAS-AD696-BM-REV00EN
Page 5 of 10
1. PRESENTATION
The AD696/BM paging microphone base can be connected to an AD615 Tema Encoder to launch announcements
on the LAN network in Multicast channels to the network amplifiers or to the IP-SIP AD600 series loudspeakers of
the SipComStage line.
The desktop base is equipped with a "Talk" button to enable the microphone and a two-position switch to enable or
disable the possible background music source connected to the AD615 Encoder.
The base allows to send alert sounds (Chime) up to 7 different preconfigured types and can be selected by a Dip-
Switch located under the base.
On request, the sounds (or short messages) can be customized according to customer’s speci-fications, maximum
memory capacity 16sec.
Il braccio, flessibile in due punti, è estraibile ed è fissato sulla base con un connettore standard XLR.
Three bright LED on the base signal the status of the activity.
"Always on” function, activated by pressing the "Talk" button with a particular sequence.
The 1.5 meter cable is terminated with a RJ45 connector specifically wired for the TEMA AD615/S Encoder.
LAN
NETWORK
Microphone Base
AD696/B
AD696/B Paging Microphone Base with AD615/S Encoder
IP PBX
AD611
IP-SIP Amplifier terminal
unidirectional 2 x 6W with
passive loudspeakers
AD635
IP-SIP Speaker bidirectional
terminal 2 x 6W
Microphone
Audio source
Radio, Compact Disk,
iPod, PC, etc…
Other AD600 series
SipComStage
terminals
Multicast
Encoder
AD615/S
