TEMA TELECOMUNICAZIONI SRL
AC-16Q / AC-16R Analog telephone line alarm
MAS-AC-16-REV03EN
Page 7 of 10
5.2.
Connection
Connect the cables as described. Connect the two pair of wires of the telephone line. Provide two
extra wires to connect external alarm button. If desired, provide two extra wires to connect an
external reset button.
•
Connect the telephone line from the PBX to the LINE terminal
•
Connect the two wires from the external alarm button to the ALARM terminal
•
Connect the optional external reset button to the PROGRAM terminal
•
The phone must be connected later on the plug outlet of AC-16 (AC-16 will be connected in
series between the existing line and the analog telephone, PHONE terminal is already
connected by the factory at the RJ11 outlet of AC-16)
•
WARNING: Do not connect the telephone line to the ALARM or PROGRAM terminals. The
device can be irreversible damaged. The device is designed to operate with only one
analog phone connected downstream. It is possible to connect only dry contacts to the
ALARM and PROGRAM terminals (i.e. free from tension and references to other electrical
equipment)
AC-16R
The screw terminals are accessible by removing the cover of the case
AC-16Q
The
screw
terminals
are
accessible
after
removing
the
cover
and having unscrewed the two screws that attach the board to the socket
Connect here the
two wires for
PROGRAM button
LINE terminal for
the two-wire
PBX’s telephone
line
Connect here the
two wires for
ALARM button
Connect here the
two wires for
ALARM button
LINE terminal for
the two-wire
PBX’s telephone
line
Connect here the
two wires for
PROGRAM button
Internal button
for PROGRAM
and alarm silence
Internal button
for PROGRAM
and alarm silence
(on the other side of
the board)
PHONE terminal
(already
connected)
PHONE terminal
(already
connected)