telylabs telyHD, Быстрый старт

Страница: 6 / 12

5
Plugging in your telyHD
1
Connect to the TV or AV receiver
First, plug the smaller end of the HDMI
cable into the port labeled
on your telyHD.
Next plug the larger end of the HDMI
cable into an open HDMI (IN) port on
either your
A TV or your B AV receiver
as shown at right.
If in doubt, plug the HDMI cable directly
into your TV as shown in option
A
.
2 Connect to the Internet
Wired: (recommended)
Connect one end of an Ethernet cable (not
included) directly to your router and plug
the other end of the cable into the Ethernet
port labeled
on your telyHD.
Wi-Fi: (alternate)
If you want to connect via Wi-Fi, skip this
step for now. You will be able to configure
your Wi-Fi settings later in the process.
3 Connect to power
Plug the included power adapter into a
power outlet, and plug the other end into
the power port on your telyHD. This
will automatically start your telyHD.
International Use: Your telyHD’s power adapter will work
worldwide and can accommodate from 110 to 240 volt. If you
are outside the USA, you may need a plug adapter to fit into the
power outlet used in your country.
or
Power
Broadband
Ethernet
AV receiver
tely HD
TV
B A
Get r
eady
Setup
Make a call
Mor
e info