Telycam TLC-700-IP-35-4K, Руководство пользователя

Страница: 26 / 40

24
FPGA VER FPGA firmware version
CAM VER Camera version
RELEASE Software release date
Set IP Address in Menu
In order to facilitate customer debugging, the camera has the support menu to set IP address. The specific methods are as follows:
1.Press "MENU" to open the menu interface, select "network parameters" in the menu to call up the IP setting interface:
2.Right click the remote control to enter the IP setting interface, and select the parameters to be set by using the navigation up and
down keys, and then select the IP address, mask, gateway:
3.Short press the number key to set the corresponding parameters. After setting the current parameters, press the "MENU" key
again to complete the current parameter setting;
4. To exit the menu, just press the "MENU" key again.