14
Manual - Shutter is fixed, and gives the exposure control priority to other resources.
DSS :
Minimum slow shutter limit is down to 1/1 seconds.
Camera make Shutter speed longer to selected shutter limit when dark conditions.
Flickerless :
This function used only for specific country to remove light flickering when light appears to flutter.
7.4. WHITE BALANCE
AUTO :
Color temperature is automatically adjusted to 3,000°K ~8,000°K
ATW :
Color temperature is automatically adjusted to 1,900°K ~ 11,000°K
MANUAL WB :
Color Temperature is manually adjustable to adjusting value.
Color temperature can be selected to LOW/ MIDDLE/ HIGH mode.
RED and BLUE gain can be changed for better pictures.
PUSH WB :
Color Temperature is manually adjustable to adjusting value.
The One Push White Balance mode is a fixed white balance mode that may be automatically readjusted
only at One Push Trigger,
while the camera is directed at a piece of white paper to obtain the optimum
state under current illumination.
One Push White Balance data is lost when the power is turned off. If the power is turned off,
reset One Push White Balance.
7.5. DAY / NIGHT
AUTO :
Auto day/night mode automatically switches between Color and Black/White depending on darkness.
ICR(IR cut) filter is removed when it switches to black/white.
D/N level – This level is threshold for switching day to night. It is same as the exposure gain level.
Margin – Different exposure gain level is needed to avoid malfunctions.
Dwell time - is checking time for condition of light to confirm changing to Color and Black/White.
Night Burst – Night burst off makes that the color burst is removed when ICR switches to black/white.
DAY :
The camera keeps color mode constantly.
NIGHT :
The camera keeps black/white mode constantly.
EXT
:
External control trigger input may switch between Day and Night mode.
Connect D/N input pin to GND to activate night mode or leave floating to deactivate.
