Telycam TLC-1000-U3-10, Руководство пользователя

Страница: 19 / 24

18
OSD MENU
1.under working mode, press the menu button on the IR remote, to enter the OSD menu ;
2.Use the navigate button to select the main menu. Once been selected, the main menu will change to grey color
background, and the right side will show all parameters under this sub menu :
3.Press the right navigate button to enter sub menu, use up and down navigate button to select parameter;
4. Press the menu button again to return to previous menu; Press it continuously to exit the OSD menu.
Before exiting, will show up a window to remind whether need to save all settings ( use left and right button to
set)
5.OSD Menu List& Defaulted Setting
CAMERA SET
LANGUAGE ENGLISH/CHINESE
PROTOCOL VISCA/PELCO-P/PELCO-D VISCA
ADDRESS VISCA:1~7 PELCO-P/D:0~255 1
BAUD RATE 2400/9600/115200 9600
PARITY BIT NONE
RETURN Return to previous menu
VIDEO MODE
It will cause video freeze if switch video mode via OSD menu;
Only recommend to change video mode via UVC control.
RETURN Return to previous menu
FOCUS
FOCUS MODE AUTO/MANU/PUSH AUTO
SENSITIVITY Focus Sensitivity setting: LOW/MID/HIGH MID