Tely HD Base Edition, Быстрый старт, Страница: 7 / 12

Get r
eady
Make a call
Mor
e info
4
Change the Input/Source on your
TV
To use Tely HD , you will need to switch
your TV or AV receiver’s input to match
the HDMI input used by your
Tely HD
in the previous step.
HD camera
T ely HD button
& indicator LED
Camera on LED
Privacy shutter
Infrared (IR)
remote receiver
4 Noise-canceling microphones
to enhance audio quality
Fr
ont view
Ringer
Back view
SD card reader
USB port
Built-in Wi-Fi
Ethernet port
Mini HDMI port
Power port
T ely HD
Guided Setup
Note: For the remainder of the setup
process you’ll need you r Tely HD
remote. After a few moments you
should see a screen similar to the
following:
Follow the onscreen instructions to
con igure your Tely HD.
Connect via Wi-Fi
If you did not connect your Tely HD
using an Ethernet cable, follow the
instructions in Guided Setup to add
Tely
HD to your home Wi-Fi network.
For more information on how to
use your remote, flip open this flap.
Speaker
Examples may not match your remote.
To change inputs, look for the Input/Source
button on your TV remote or AV receiver.
Press this button to cycle through the
inputs until you get to the HDMI input used
by T ely HD. You may need to wait a
couple of seconds between each button
press to allow your TV to adjust.
You should now see the Tely HD lo go or
the Welcome Screen for the Guided Setup
on your TV.
Note: To return to watching TV, repeat the same process
described above. Cycle through the Input or Source settings
until you reach the correct one.
Setup