2
UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the
appliance operates properly by plugging the power supply cord into a conveniently located 110-120 Volt
grounded outlet.
【
Grounding
Grounding
Grounding
Grounding Appliance
Appliance
Appliance
Appliance
】
This appliance is for use on 120 Volts. The cord has a plug
as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot
receptacles. The green grounding lug extending from the
adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove
plug from outlet.
WARNING:
WARNING:
WARNING:
WARNING:
Keep the front of the appliance through which the heat is
radiated at least 1 meter away from furniture, curtains and
other flammable objects at all time.
Never use an extension lead. The mains cable must remain
at the back of the appliance and must not be in contact with
any hot elements.
【
【
【
【
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
】
】
】
】
Using the Philips Screw
Driver"+"
Driver"+"
Driver"+"
Driver"+"
to take off the two screws in the front two sides
Figure
(A)
(A)
(A)
(A)
, then
have two people to take off the Glass Panel
Figure
(B)
(B)
(B)
(B)
ALWAYS
ALWAYS
ALWAYS
ALWAYS unplug
unplug
unplug
unplug
this fireplace heater
before
before
before
before assembly
assembly
assembly
assembly
or
cleaning,
cleaning,
cleaning,
cleaning, or
or
or
or before
before
before
before relocating.
relocating.
relocating.
relocating.
Failure to do so could result in
electric
electric
electric
electric shock
shock
shock
shock
,
fire
fire
fire
fire
, or
personal
personal
personal
personal injury
injury
injury
injury
.
Warning
Warning
Warning
Warning
