Telular PHONECELL SX6P CDMA2000 1X, Руководство пользователя

Страница: 14 / 44

CALL FUNCTIONS
Making Calls
1. Pick up the handset or Press the SPEAKERPHONE key. The SX6P is now “off-hook.”
2. Listen for dial tone.
3. Dial the phone number. The dialed number will be displayed. The name will also be displayed
if it is stored in the phonebook.
Correct Dialing Errors
• To erase one digit, Press the CLR key once.
• To erase all digits, Press and hold down the CLR key until all digits are erased.
Redial the Last Telephone Number Dialed
1. Pick up the handset or Press the SPEAKERPHONE key. The SX6P is now “off-hook.”
2. Press the REDIAL key.
Receiving Calls
When there is an incoming call, the SX6P rings, an incoming call notification displays the call
type and Caller ID information (if available), and the LED blinks.
1. Pick up the handset or press the
SPEAKERPHONE key. Press CLR to send the call directly
to voicemail.
2. Begin talking.
Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller’s number when the SX6P rings. If the caller’s name and
number are stored together in the SX6P phonebook, the caller’s name and number will be dis-
played. Contact your service provider to activate this feature.
NOTE: If there are missed calls (calls not answered), “ MISSED CALLS ” will be displayed with
the number of calls missed. See the Call Logs section of this manual for more information.
Ending Calls
Hang up the phone by either placing the handset back onto the SX6P cradle or press the
SPEAKERPHONE key if using the speakerphone.
In-Call Functions
Mute a Call
1. While in a call, press the MUTE key. A notification will display in the upper right corner of the
LCD screen.
2. Press the MUTE key again to un-mute the microphone.
Call Waiting
The FLASH key is used to answer call waiting and to switch between calls. Contact your service
provider regarding the availability of the call waiting feature.
Place a Call on Hold
1. While in a call, press the HOLD key.
2. The display will change from Active to Held.
3. To reactivate the call, press the
HOLD key again.
3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1. Make the first call and wait until it connects.
2. After the first call is connected, dial the second number.
3. Press the
FLASH key. This connects the second call and puts the first call on hold.
4. Wait for the second call to connect.
5. After you are connected to the second call,
Press FLASH , which then connects the first
call and completes the 3-way call.
Phonecell
®
SX6P CDMA 8 User Manual