Telular phonecell sx5e, Руководство пользователя, Страница: 25 / 37

Phonecell
®
SX5e GSM 25 Technical Manual
ANALOG FAX
Analog (i.e. normal fax from fax machine) fax calls (CCITT Group 3, Bearer Service TS 62) can
be made from phone and fax jacks, depending
on the option set.
To Send Fax Calls
1) Set up your fax machine just as you would
for a wired telephone.
2) Outgoing fax calls at the fax jack are
processed directly. Outgoing fax calls at the
phone jack always require the analog fax
bypass string, since the default for this jack
is voice calls. See the User Programming
Commands section of this manual for analog
fax setup.
NOTE: Make sure the fax machine is properly
connected as shown in Figure 7.
To Receive Fax Calls
By factory default, you do not have to do any-
thing to receive a fax, provided you have set-up
your fax machine as shown in Figure 7.
However, the user can have options to receive a
fax through the phone port. Refer to the User
Programming section of this addendum for
instructions on programming of the single jack
option and in-bound fax port option.
To Set Up Analog Fax Bypass String
NOTE: The analog fax bypass string can only be used in single jack operation.
This feature allows the phone jack to process the next outgoing call as an analog fax call. After
this call, the phone jack automatically returns to the default voice protocol. The user enters this
string prior to dialing the telephone number. The terminal interprets the string and properly sets
up the call. Refer to the following examples.
To Send a Fax on a Fax Machine Connected to the Phone Jack:
1) Lift up the handset (take off-hook).
2) Dial # * 19 * 1 #, followed by the fax number to be called.
3) Press START on the fax machine.
NOTE: If the fax machine does not have a handset, enter # * 19 * 1 #, followed by the remote
fax number to be called. Press START.
If the fax machine has the capability to store telephone numbers for speed dialing, the # * 19 * 1
# command string may be programmed into the machine as a prefix to the telephone number.
With some machines, it may also be possible to store the command string as a speed dial num-
ber and dial the remote fax machine telephone number manually.
Figure 10 -
Analog Fax Connection.