VoiceUSB
/G10 User Manual
22
Each mobile phone has it’s own way to make a pause. Please see below:
For a Nokia phone:
Step 1. Dial phone number of a SIM card inserted into
VoiceUSB
device
Step 2. Press * 3 times to show ‘p’. (This causes dialing to pause)
Step 3. Dial internal number
Example. 0037068884
p
103
For a Siemens or Panasonic phone:
Step 1. Dial phone number of a SIM card inserted into
VoiceUSB
device
Step 2. Press and hold ‘0’ to show ‘+’. (This causes dialing to pause)
Step 3. Dial internal number
Example. 0037068884
+
103.
For a Motorola or Ericsson phone :
Step 1. Dial phone number of a SIM card inserted into
VoiceUSB
device
Step 2. Press and hold * to show ‘p’. (This causes dialing to pause)
Step 3. Dial internal number
Example. 0037068884
p
103.
5.3.2.2
Extension
mode parameters
All parameters can be changed with
VoiceUSB Configuration Tool
or through the
Service menu
of the
connected to the device phone.
DTMF sensitivity
This menu item allows to change number dialing tone signal level in
Extension
mode. It is
recommended to change it if during the call in
Extension
mode the device does not react to a dialed
number or reacts to several digits (then the level should be decreased) or if the number is dialed
because of the interference when in reality no number is being dialed (then the level should be
increased).
Prefix blocking
This mode allows to create a blacklist of number prefixes so the user would not be able to make a
call to the number which starts with them. If user dialls a forbidden prefix,
VoiceUSB
will restart itself.
The prefix list can be formed in
Service Meniu
or
VoiceUSB Configuration Tool
.
Number blocking
This mode allows to create a blacklist of numbers so the user would not be able to call them. If
user dialls a forbidden number,
VoiceUSB
will restart itself. The forbidden number list can be formed in
Service Meniu
or
VoiceUSB Configuration Tool
.
